NXP SSL152x 5W LED驱动方案
NXP 公司的SSL152x系列是开关电源（SMPS）控制器，采用高压EZ-HV SOI工艺和低压BiCMOS工艺，能直接从火线整流中工作。器件包括高压功率开关和起动电路。器的功率高达15W，通用AC电压（80V-276V），可调整的频率，待机功耗低于100mW，主要用在改进型，镇流器，建筑物轮廓和隧道信号照明。本文介绍了SSL152x 主要特性，方框图，典型配置框图以及SSL1523 5 W LED驱动器技术指标，演示板电路图和材料清单（BOM）。
SSL1523 high power factor 5 W LED driver for universal mains
SSL152x SMPS ICs for mains LED drivers
The SSL152x family is a Switched Mode Power Supply (SMPS) controller IC that operates
directly from the rectified universal mains. It is implemented in the high-voltage EZ-HV SOI process, combined with a low-voltage BiCMOS process. The device includes a high-voltage power switch and a circuit for start-up directly from the rectified mains voltage.
A dedicated circuit for valley switching is built in, which makes a very efficient slim-line ectronic concept for solid state lighting applications possible.
The SSL152x can operate in applications with a power range of up to 15 W. For a power range between 15 W and 25 W the SSL1623PH is the best choice. For LED powers above 25 W the SSL1750 can be used.
In its most basic applications, the SSL152x family acts as a voltage source. Here, no additional secondary electronics are required. A combined voltage and current source can be realized with minimum costs for external components. Implementation of the SSL152x family renders an efficient and low cost power supply system for mains LED drivers.
SSL152x 主要特性：
Designed for mains LED drivers up to 15 W
Integrated power switch:
SSL1522T: 12 ?; 650 V
SSL1523P: 6.5 ; 650 V
Operates from universal AC mains supplies (80 V to 276 V)
Adjustable frequency for flexible design
RC oscillator for load insensitive regulation loop constant
Valley switching for minimum switch-on loss
Low standby power (< 100 mW) with frequency reduction at low power outputs
Adjustable overcurrent protection
Undervoltage protection
Temperature protection
Short circuit winding protection
Simple application with both primary and secondary (opto) feedback
Available in DIP8 and SO14 packages
SSL152x 应用：
Retro fit LED lamps
LED ballasts
Contour lighting
Channel letter lighting
Commercial lighting, e.g. cabinet or freezer lights
Other lighting applications
图1。SSL152x方框图
图2。SSL152x典型配置框图-初级检测
SSL1523 5 W LED驱动器
The SSL1523 5 W LED driver is a high performance solution for a professional non-dimmable application with multiple high power LEDs, that requires galvanic isolation and a safe output voltage. It can generate a regulated output current with an output power of up to 5 W, which is equal to a 25 W incandescent lamp (at 63 Lumen/W). Examples are shelf lighting, down lighting, LED lighting for bathrooms etc. This device can also be used with less external components in an application, if some performance compromises can be accepted. Details of a solution the specification for the SSL1523 5 W LED driver。
SSL1523 5 W LED驱动器指标：
图3。SSL1523 5 W LED驱动器外形图
图4。SSL1523 5 W LED驱动器演示板电路图
演示板材料清单（BOM）：
SSL1523 high power factor 5 W LED driver for universal mains
SSL152x SMPS ICs for mains LED drivers
The SSL152x family is a Switched Mode Power Supply (SMPS) controller IC that operates
directly from the rectified universal mains. It is implemented in the high-voltage EZ-HV SOI process, combined with a low-voltage BiCMOS process. The device includes a high-voltage power switch and a circuit for start-up directly from the rectified mains voltage.
A dedicated circuit for valley switching is built in, which makes a very efficient slim-line ectronic concept for solid state lighting applications possible.
The SSL152x can operate in applications with a power range of up to 15 W. For a power range between 15 W and 25 W the SSL1623PH is the best choice. For LED powers above 25 W the SSL1750 can be used.
In its most basic applications, the SSL152x family acts as a voltage source. Here, no additional secondary electronics are required. A combined voltage and current source can be realized with minimum costs for external components. Implementation of the SSL152x family renders an efficient and low cost power supply system for mains LED drivers.
SSL152x 主要特性：
Designed for mains LED drivers up to 15 W
Integrated power switch:
SSL1522T: 12 ?; 650 V
SSL1523P: 6.5 ; 650 V
Operates from universal AC mains supplies (80 V to 276 V)
Adjustable frequency for flexible design
RC oscillator for load insensitive regulation loop constant
Valley switching for minimum switch-on loss
Low standby power (< 100 mW) with frequency reduction at low power outputs
Adjustable overcurrent protection
Undervoltage protection
Temperature protection
Short circuit winding protection
Simple application with both primary and secondary (opto) feedback
Available in DIP8 and SO14 packages
SSL152x 应用：
Retro fit LED lamps
LED ballasts
Contour lighting
Channel letter lighting
Commercial lighting, e.g. cabinet or freezer lights
Other lighting applications
图1。SSL152x方框图
图2。SSL152x典型配置框图-初级检测
SSL1523 5 W LED驱动器
The SSL1523 5 W LED driver is a high performance solution for a professional non-dimmable application with multiple high power LEDs, that requires galvanic isolation and a safe output voltage. It can generate a regulated output current with an output power of up to 5 W, which is equal to a 25 W incandescent lamp (at 63 Lumen/W). Examples are shelf lighting, down lighting, LED lighting for bathrooms etc. This device can also be used with less external components in an application, if some performance compromises can be accepted. Details of a solution the specification for the SSL1523 5 W LED driver。
SSL1523 5 W LED驱动器指标：
图3。SSL1523 5 W LED驱动器外形图
图4。SSL1523 5 W LED驱动器演示板电路图
演示板材料清单（BOM）：
回复数 0
切换时间排序
需登录后查阅, 加载中......
